The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Our Privacy Notice contains information about our policy.
Gravel Grids offer gravel stabilisation with double strength weed suppressant membrane attached to the base. The gravel grids provide a free draining, permeable layer for residential driveways, patios and paths. The honeycomb segments prevent rutting, spreading and gravel migration making it accessible for pedestrian, vehicle, wheelchair and bicycle users. These grids have been specifically designed to accommodate 10-20mm aggregates. They are produced from recycled materials and are UV resistant. The grid size is 1.2m x 0.8m x 30mm offering a coverage of approximately 1sq metre. Suitable for both domestic and light commercial situations.
Excavate and remember to leave enough depth for the grid / gravel and sub-layers.
Lay the MOT sub-base and compact with a vibrating plate or roller at 150mm deep.
Prepare an edging. This can be monoblock, concrete edging, metal edging or timber. this prevents movement of the grids and migration of the gravel.
Cover with a 20mm deep layer of course sand / grit. The sand performs a number of tasks. It protects the grids and membrane from any sharp stones, it evens out any highs and hollows and improves the long term performance of the grids.
When laying the grids, ensure that each sheet overlaps the membrane of the previous sheet.
Cut any grids to shape with a small grinder or hand saw.
Fill the grids by discharging aggregates graded 10mm to 20mm in size directly over the surface, by wheelbarrow or directly from a loose load. Do not drive any vehicle over the grids until they have been filled.
Fill the grids to beyond the top edge of the grids to ensure they are completely covered.
